Ariane flight VA262
Ariane flight VA262 was the maiden flight of the Ariane 6, carrying a payload, consisting of a mass simulator, plus a number of small CubeSats and other experiments as rideshare payloads.
Mission
The launch experienced a one-hour delay due to a data acquisition system issue. Despite this, the countdown resumed smoothly, and the rocket lifted off successfully at 19:00 UTC, flying a northeastern trajectory that took it over Europe. During the initial launch, the initial stages, including the two P120C solid rocket boosters and core stage, performed as expected. The upper stage ignited at the T+8-minute mark and performed a ten-minute burn to establish a preliminary orbit. Following a coasting phase, the upper stage reignited at T+56 minutes for a successful 22-second burn, placing it in a circular orbit. Cubesats were deployed according to schedule at this point. However, during the mission's final phase, the auxiliary propulsion system malfunctioned at T+1 hour and 14 minutes.The APU performs two critical functions in the re-ignition of the upper stage's Vinci engine. First, the APU heats up small amounts of propellant inside a 3D-printed gas generator and the gas created in this way is injected back into the tanks to re-pressurize them. Secondly, the APU can produce a low level of thrust, to either settle floating propellant in the tanks before re-ignition of the Vinci engine or to make fine orbital adjustments.
The failure of the APU prevented the planned third burn at T+2 hours and 37 minutes. The third burn was considered an important test for future Ariane 6 missions and as part of ESA's efforts to leave zero launch debris in space.
The plan was for this third burn to direct the upper stage into a safe deorbit over the Pacific Ocean and release the two reentry capsule experiments. The failure left the upper stage stranded in a circular orbit. At this altitude, their natural orbital decay due to atmospheric drag is expected to take decades.