Abiological nitrogen fixation using homogeneous catalysts
Abiological nitrogen fixation describes chemical processes that fix N2, usually with the goal of generating ammonia. The dominant technology for abiological nitrogen fixation is the Haber process, which uses iron-based heterogeneous catalysts and H2 to convert N2 to NH3. This article focuses on homogeneous catalysts for the same or similar conversions.
Background
is essential for human life. Currently, the industry uses the Haber–Bosch process to convert N2 and H2 to NH3 based on the metal catalysis under very high pressure and temperature conditions. Alternative strategies that realize the transformation from N2 to NH3 under mild conditions are a long-lasting goal in chemistry. In the past decades, a number of transition-metal species have been found to bind N2. The prevalence of transition metals in dinitrogen activation is attributed to the fact that the unoccupied and occupied d orbitals could be both energetically and symmetrically accessible to accept electron density from and back donate to N2. Nevertheless, the development of low-valent, low-coordinate main-group elements which mimic the electronic properties of transition metal provides more opportunities to unearth the N2 activation by main group elements.Lithium can also react with N2 at room temperature to give an isolable product Li3N. However, it was until recently that the controllable, stepwise N2 activation by main group element began to thrive, especially for those whose key intermediates were well structurally characterized and even isolated.
Transition metals
Vol'pin and Shur
An early influential discovery of abiological nitrogen fixation was made by Vol'pin and co-workers in Russia in 1970. Aspects are described in an early review:"using a non-protic Lewis acid, aluminium tribromide, were able to demonstrate the truly catalytic effect of titanium by treating dinitrogen with a mixture of titanium tetrachloride, metallic aluminium, and aluminium tribromide at 50 °C, either in the absence or in the presence of a solvent, e.g. benzene. As much as 200 mol of ammonia per mol of was obtained after hydrolysis...."These results led to many studies on dinitrogen complexes of titanium and zirconium.
Mo- and Fe-based systems
Because Mo and Fe are found at the active site of the most common and most active form of nitrogenase, these metals have been the focus of particular attention for homogeneous catalysis. Most catalytic systems operate according to the following stoichiometry:The reductive protonation of metal dinitrogen complexes was popularized by Chatt and coworkers, using Mo22 as substrate. Treatment of this complex with acid gave substantial amounts of ammonium. This work revealed the existence of several intermediates, including hydrazido complexes. Catalysis was not demonstrated. Schrock developed a related system based on the amido Mo ocomplex Mo. With this complex, catalytic nitrogen fixation occurred, albeit with only a few turnovers.
Intense effort has focussed on family of pincer ligand-supported Mo-N2 complexes. In terms of it donor set, and oxidation state, these pincer complexes are similar to Chatt's complexes. Their advantage is that they catalyze the hydrogenation of dinitrogen. A Mo-PCP complex exhibits >1000 turnovers when the reducing agent is samarium iodide and the proton source is methanol.
Iron complexes of N2 are numerous. Derivatives of Fe with C3-symmetric ligands catalyze nitrogen fixation.
Photolytic routes
nitrogen splitting is also considered.p-Block systems
Although nitrogen fixation is usually associated with transition metal complexes, a boron-based system has been described. One molecule of dinitrogen is bound by two transient Lewis-base-stabilized borylene species. The resulting dianion was subsequently oxidized to a neutral compound, and reduced using water.Nitriding
Particular metals can react with nitrogen gas to give nitrides, a process called nitriding. For example, metallic lithium burns in an atmosphere of nitrogen, giving lithium nitride. Hydrolysis of the resulting nitride gives ammonia. In a related process, trimethylsilyl chloride, lithium and nitrogen react in the presence of a catalyst to give trisamine, which can be further elaborated. Processes that involve oxidising the lithium metal are however of little practical interest, since they are non-catalytic and re-reducing the ion residue is difficult. The hydrogenation of Li3N to produce ammonia has seen some exploration since the resulting lithium hydride can be thermally decomposed back to lithium metal.Some Mo complexes also cleave N2:
This and related terminal nitrido complexes have been used to make nitriles.