Rambler (automobile)
Rambler is an automobile brand name that was first used by the Thomas B. Jeffery Company between 1900 and 1914.
Charles W. Nash bought Jeffery in 1916, and Nash Motors reintroduced the name to the automobile marketplace from 1950 through 1954. The "Rambler" trademark registration for use on automobiles and parts was issued on 9 March 1954 for Nash-Kelvinator.
Nash merged with the Hudson Motor Car Company to form American Motors Corporation in 1954. The Rambler line of cars continued through the 1969 model year in the United States and 1983 in international markets.
Rambler cars were often nicknamed the "Kenosha Cadillac" after the original location and their most significant place of manufacture in the city of Kenosha, Wisconsin. Cadillac is an unrelated luxury car brand, but Nash and Rambler cars became known for quality construction and numerous features, leading some to the label as a affordable higher level car made in Kenosha.
Rambler 1897–1914
The first use of the name Rambler for an American-made automobile dates to 1897 when Thomas B. Jeffery of Chicago, Illinois, builder of the Rambler bicycle, constructed his prototype automobile.After receiving positive reviews at the 1899 Chicago International Exhibition & Tournament and the first National Automobile Show in New York City, Jeffery entered the automobile business. Following the sudden death of his Rambler partner, R. Philip Gormully, Jeffery sold their bicycle business to the American Bicycle Company, but retained rights to the Rambler name. In 1900, he bought the old Sterling Bicycle Co. factory in Kenosha, Wisconsin, and set up shop.
Thomas Jeffery and his son Charles experimented with such early technical innovations as a steering wheel, left-hand driving and the engine placement under a hood instead of under the seat, but they was decided that such features were too advanced for the motoring public of the day. The first Ramblers were tiller-steered, had right-hand drive, and the single-cylinder engine was positioned under the seat. Rambler innovated various design features and was the first to equip cars with a spare wheel-and-tire assembly. This allowed the driver, when experiencing a flat tire, to exchange the spare wheel and tire for the flat one, rather than patching.
Jeffery started commercially mass-producing automobiles in 1902. By the end of the year the company had produced 1,500 motor cars, priced at US$750, one-sixth of all cars that were manufactured in the U.S. during that year. The Thomas B. Jeffery Company was the second largest auto manufacturer at that time, behind Oldsmobile.
In 1904, Jeffery built 2,342 Ramblers. Higher-powered two-cylinder versions with front-mounted engines and steering wheels were now available. In 1905, the single-cylinder was discontinued, and three larger two-cylinder models priced from $1,200 to $3,000 were offered. A Rambler four-cylinder was introduced in 1906.
New employee Edward S, Jordan, who would later become Jeffery's secretary and general manager, provided advertising copy such as "The Right Car at the Right Price", “June Time Is Rambler Time”, and other similarly evocative phrases. By 1906, Rambler was considered an industry leader, with one of the best-equipped automobile factories. Thomas Jeffery was not interested in increasing mass production, however, and settled into a pattern of producing 2,500 Ramblers a year.
In 1910, all Ramblers were now four-cylinder medium-priced cars. While on vacation in 1910, Thomas B. Jeffery died of a heart attack and his son Charles took over the newly incorporated Thomas B. Jeffery Company. Charles increased annual production by about 500 cars and, in 1912, introduced new Ned Jordan model names such as Cross Country, Country Club, Knickerbocker, and Valkyrie. For 1913 the last Rambler branded models were the Cross Country roadster and touring car, an Inside Drive coupe and the Gotham Limousine, priced from US$1,650 to $2,750.
In 1914, Charles T. Jeffery, Thomas B. Jeffery's son, replaced the Rambler brand name with Jeffery in honor of his now-deceased father.
In 1916, the Thomas B. Jeffery Company was purchased by Charles W. Nash and became Nash Motors Company in 1917. The Jeffery brand name was dropped at the time of the sale. The manufacture of Nash-branded automobiles commenced. In 1937, the concern became the Nash-Kelvinator Corporation through a merger with the major appliance maker.
Overview of production figures
Rambler 1950–1957
Under the direction of Charles Nash's successor, George W. Mason, Nash-Kelvinator Corporation began the development of a small car that could be produced inexpensively for the post-World War II economy. Both General Motors and Ford had plans to develop smaller-sized cars after the war, but did not realize them. Moreover, steel shortages following the war limited the amount of raw materials that Nash could obtain. Hence, Mason ordered the development of a "compact car" that would have greater appeal to consumers, because the Crosley in production at that time was considered too small to be practical. The new Nash compact featured a unique convertible design. It included many standard features that were typically options on other cars. This approach maximized profits for the company. Nash-Kelvinator trademarked Rambler in 1950, the same nameplate as was used by its predecessor company in the early 1900s.When introduced, the Rambler was an immediate success for Nash. As the steel quotas related to the Korean War eased, the Rambler line was broadened in its model types, first a station wagon and two-door hardtop named "Country Club", and later a two-door sedan. A further expansion of the line for 1954 included a four-door sedan and station wagon called "Cross Country" on a stretched wheelbase, which proved to be as successful as the first generation of two-door sedan convertibles. The Rambler became the most successful of the early post-Second World War American compacts compared to the Henry J, Willys Aero, and Hudson Jet.
The first generation of modern Ramblers carried a modified version of Nash's Airflyte styling, which included closed wheel openings. While the wheel openings of any car are a major source of wind resistance, the design was rather primarily an engineering design to increase the strength of the car for impact resistance. The engine is positioned between massive inner fender bulges to allow for the skirted front fenders along with a narrow front track to provide a turning circle of. Ramblers continued to use this styling until 1955 when the front wheels were revealed by a periodic design update.
In 1954 the Rambler offered the first combination heating and air conditioning unit available on American cars. The unit could be an add-on or could be installed at the factory for $395, which at that time was about the lowest-cost unit available in an American car.
In 1954, American Motors Corporation was formed from the merger of Nash-Kelvinator and the Hudson Motor Car Company. Following the merger, 1955 and 1956 Ramblers were badged as both Nashes and Hudsons, with no visible differences. Rambler became a marque in its own right for the 1958 model year. The Nash and Hudson makes continued as a "senior" model only through 1957, after which all AMC's offerings were marketed as Ramblers, except the imported 1958–1962 Metropolitan.
Rambler 1958–1969
With the elimination of the Nash and Hudson marque, Rambler became the primary AMC make for 1958. At the start of the 1960s, George Romney made a marketing decision that more fully unified the Rambler model names under the Rambler brand. In 1962, the Ambassador, a top-trim level model, was officially brought under the Rambler name. The former Rambler Six and Rambler Rebel V8 were renamed the Rambler Classic. While the top-line models for 1958-1961 were advertised as the "Ambassador V-8 by Rambler", but on the cars themselves, the badging was "Rambler Ambassador".In 1958, AMC re-introduced America's first successful compact car, the Rambler American, after a three-year hiatus. This car was essentially the no-frills, economical 1950 Nash Rambler, but slightly restyled and modernized with a new grille and full cut-out wheel openings. The Recession of 1958 hurt all carmakers except AMC, whose economy-oriented Ramblers saw high demand. The American was an instant success and lost sales only after the "Big Three" each introduced compact cars of their own in the 1960s.
Romney also put into play his plan to slash production costs, which involved more common parts sharing between the Ambassador and Classic models. Beginning in 1962, all "senior" Rambler models would share the same automobile platform with identical wheelbase and body parts. However, the engines, trims, and equipment levels distinguished the Classic from the Ambassador. The Rambler's compact size also made it an international competitor, and between 1961 and 1965, AMC opened thirteen foreign assembly plants, from Costa Rica to the Philippines.
In 1963, the entire Rambler line received the Motor Trend Car of the Year award. However, Romney's departure to become Michigan governor opened the door for his successor, Roy Abernethy, to redirect the company towards a strategy of competing head-to-head with the Big Three with a variety of bodies and automobile platforms. This new plan also included marketing the various models apart from the Rambler brand name, which Abernethy thought would be a hindrance in the market segments he hoped to pursue.
One of the first moves in that direction was the development of the 1965 line of Ramblers, which visually split the Classic from the Ambassador while still sharing many parts. Once again, the Ambassador had a unique, extended wheelbase. In addition, AMC introduced the Marlin, a hardtop fastback intended to enter AMC in the youth and personal luxury market segments as well as also positioning it as a "halo" vehicle.
AMC chief stylist Richard Teague introduced a restyled and attractive Rambler American in 1964, which was a sales success. This basic body remained in its original shape through 1969.
Backed by marketing reports, Abernethy next made a persuasive argument to the AMC board that the Rambler name had not only acquired a stodgy image and hindered increasing sales, but that consumers associated it with compact cars. In what hindsight would show to be an ill-conceived decision, American Motors began to phase it out in favor of an AMC marque starting with the 1966 model year as it attempted to become a multiplatform automobile manufacturer.
By 1968, the only vehicle produced by AMC to carry the Rambler marque was the compact Rambler American. Although designed as a "basic" economy car, the American spawned the audacious SC/Rambler, developed with Hurst Performance. While AMC planned to produce only 500 for the 1969 model year, the "Scrambler" proved popular so two more groups of about 500 each were built. All featured the same V8, four-barrel carburetor, and close-ratio four-speed transmission of the AMX, plus Hurst shifter, Twin-Grip differential, and cold air hood.
For the final year in 1969, the "American" line was called Rambler. The 1969 Rambler were the only U.S. compact cars available that year in a two-door hardtop body style; Ford compacts were available only as sedans.
The last U.S.-built Rambler, of over 4.2 million cars that carried the Rambler name that rolled off the assembly line in Kenosha, was produced on 30 June 1969.