Radio frequency
Radio frequency is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency range from around to around. This is roughly between the upper limit of audio frequencies that humans can hear and the lower limit of infrared frequencies, and also encompasses the microwave range. These are the frequencies at which energy from an oscillating current can radiate off a conductor into space as radio waves, so they are used in radio technology, among other uses. Different sources specify different upper and lower bounds for the frequency range.
Electric current
s that oscillate at radio frequencies have special properties not shared by direct current or lower audio frequency alternating current, such as the 50 or 60 Hz current used in electrical power distribution.- Energy from RF currents in conductors can radiate into space as electromagnetic waves. This is the basis of radio technology.
- RF current does not penetrate deeply into electrical conductors but tends to flow along their surfaces; this is known as the skin effect.
- RF currents applied to the body often do not cause the painful sensation and muscular contraction of electric shock that lower frequency currents produce. This is because the current changes direction too quickly to trigger depolarization of nerve membranes. However, this does not mean RF currents are harmless; they can cause internal injury as well as serious superficial burns called RF burns.
- RF current can ionize air, creating a conductive path through it. This property is exploited by "high frequency" units used in electric arc welding, which use currents at higher frequencies than power distribution uses.
- Another property is the ability to appear to flow through paths that contain insulating material, like the dielectric insulator of a capacitor. This is because capacitive reactance in a circuit decreases with increasing frequency.
- In contrast, RF current can be blocked by a coil of wire, or even a single turn or bend in a wire. This is because the inductive reactance of a circuit increases with increasing frequency.
- When conducted by an ordinary electric cable, RF current has a tendency to reflect from discontinuities in the cable, such as connectors, and travel back down the cable toward the source, causing a condition called standing waves. RF current may be carried efficiently over transmission lines such as coaxial cables.
Frequency bands
Frequencies of 1 GHz and above are conventionally called microwave, while frequencies of 30 GHz and above are designated millimeter wave.
More detailed band designations are given by the standard IEEE letter- band frequency designations and the EU/NATO frequency designations.