Ionic liquid


An ionic liquid is a salt in the liquid state at ambient conditions. In some contexts, the term has been restricted to salts whose melting point is below a specific temperature, such as. While ordinary liquids such as water and gasoline are predominantly made of electrically neutral molecules, ionic liquids are largely made of ions. These substances are variously called liquid electrolytes, ionic melts, ionic fluids, fused salts, liquid salts, or ionic glasses.
Ionic liquids have many potential applications. They are powerful solvents and can be used as electrolytes. Salts that are liquid at near-ambient temperature are important for electric battery applications, and have been considered as sealants due to their very low vapor pressure.
Any salt that melts without decomposing or vaporizing usually yields an ionic liquid. Sodium chloride, for example, melts at into a liquid that consists largely of sodium cations and chloride anions. Conversely, when an ionic liquid is cooled, it often forms an ionic solid—which may be either crystalline or glassy.
The ionic bond is usually stronger than the Van der Waals forces between the molecules of ordinary liquids. Because of these strong interactions, salts tend to have high lattice energies, manifested in high melting points. Some salts, especially those with organic cations, have low lattice energies and thus are liquid at or below room temperature. Examples include compounds based on the 1-ethyl-3-methylimidazolium cation and include: EMIM:Cl, EMIMAc, EMIM dicyanamide, ·, that melts at ; and 1-butyl-3,5-dimethylpyridinium bromide which becomes a glass below.
Low-temperature ionic liquids can be compared to ionic solutions, liquids that contain both ions and neutral molecules, and in particular to the so-called deep eutectic solvents, mixtures of ionic and non-ionic solid substances which have much lower melting points than the pure compounds. Certain mixtures of nitrate salts can have melting points below 100 °C.

History

The term "ionic liquid" in the general sense was used as early as 1943.
The discovery date of the "first" ionic liquid is disputed, along with the identity of its discoverer. Ethanolammonium nitrate was reported in 1888 by S. Gabriel and J. Weiner. In 1911 Ray and Rakshit, during preparation of the nitrite salts of ethylamine, dimethylamine, and trimethylamine observed that the reaction between ethylamine hydrochloride and silver nitrate yielded an unstable ethylammonium nitrite ·, a heavy yellow liquid which on immersion in a mixture of salt and ice could not be solidified and was probably the first report of room-temperature ionic liquid. Later in 1914, Paul Walden reported one of the first stable room-temperature ionic liquids ethylammonium nitrate ·. In the 1970s and 1980s, ionic liquids based on alkyl-substituted imidazolium and pyridinium cations, with halide or tetrahalogenoaluminate anions, were developed as potential electrolytes in batteries.
For the imidazolium halogenoaluminate salts, their physical properties—such as viscosity, melting point, and acidity—could be adjusted by changing the alkyl substituents and the imidazolium/pyridinium and halide/halogenoaluminate ratios. Two major drawbacks for some applications were moisture sensitivity and acidity or basicity. In 1992, Wilkes and Zawarotko obtained ionic liquids with 'neutral' weakly coordinating anions such as hexafluorophosphate and tetrafluoroborate, allowing a much wider range of applications.

Characteristics

ILs are typically colorless viscous liquids. They are often moderate to poor conductors of electricity, and rarely self-ionize. They do, however, have a very large electrochemical window, enabling electrochemical refinement of otherwise intractable ores.
They exhibit low vapor pressure, which can be as low as 10−10 Pa. Many have low combustibility and are thermally stable.
The solubility properties of ILs are diverse. Saturated aliphatic compounds are generally only sparingly soluble in ionic liquids, whereas alkenes show somewhat greater solubility, and aldehydes often completely miscible. Solubility differences can be exploited in biphasic catalysis, such as hydrogenation and hydrocarbonylation processes, allowing for relatively easy separation of products and/or unreacted substrate. Gas solubility follows the same trend, with carbon dioxide gas showing good solubility in many ionic liquids. Carbon monoxide is less soluble in ionic liquids than in many popular organic solvents, and hydrogen is only slightly soluble and may vary relatively little between the more common ionic liquids.
Many classes of chemical reactions, The miscibility of ionic liquids with water or organic solvents varies with side chain lengths on the cation and with choice of anion. They can be functionalized to act as acids, bases, or ligands, and are precursors salts in the preparation of stable carbenes. Because of their distinctive properties, ionic liquids have been investigated for many applications.
Some ionic liquids can be distilled under vacuum conditions at temperatures near 300 °C. The vapor is not made up of separated ions, but consists of ion pairs.
ILs have a wide liquid range. Some ILs do not freeze down to very low temperatures, The glass transition temperature was detected below −100 °C in the case of N-methyl-N-alkylpyrrolidinium cations fluorosulfonyl-trifluoromethanesulfonylimide. Low-temperature ionic liquids have been proposed as the fluid base for an extremely large diameter spinning liquid-mirror telescope to be based on the Moon.
Water is a common impurity in ionic liquids, as it can be absorbed from the atmosphere and influences the transport properties of RTILs, even at relatively low concentrations.

Varieties

Classically, ILs consist of salts of unsymmetrical, flexible organic cations with symmetrical weakly coordinating anions. Both cationic and anionic components have been widely varied.

Cations

Room-temperature ionic liquids are dominated by salts derived from 1-methylimidazole, i.e., 1-alkyl-3-methylimidazolium. Examples include 1-ethyl-3-methyl-, 1-butyl-3-methyl-, 1-octyl-3 methyl, 1-decyl-3-methyl-, 1-dodecyl-3-methyl-. Other imidazolium cations are 1-butyl-2,3-dimethylimidazolium and 1,3-di-2-methylimidazolium. Other N-heterocyclic cations are derived from pyridine: 4-methyl-N-butyl-pyridinium and N-octylpyridinium. Conventional quaternary ammonium cations also form ILs, e.g. tetraethylammonium and tetrabutylammonium.

Anions

Typical anions in ionic liquids include the following: tetrafluoroborate, hexafluorophosphate, bis-trifluoromethanesulfonimide, trifluoromethanesulfonate, dicyanamide, hydrogensulfate, and ethyl sulfate. Magnetic ionic liquids can be synthesized by incorporating paramagnetic anions, illustrated by 1-butyl-3-methylimidazolium tetrachloroferrate.

Specialized ILs

s are formed via a proton transfer from an acid to a base. In contrast to other ionic liquids, which generally are formed through a sequence of synthesis steps, protic ionic liquids can be created more easily by simply mixing the acid and base.
Phosphonium cations are less common but offer some advantageous properties. Some examples of phosphonium cations are trihexylphosphonium and tributylphosphonium.

Poly(ionic liquid)s

Polymerized ionic liquids, polys or polymeric ionic liquids, all abbreviated as PIL is the polymeric form of ionic liquids. They have half of the ionicity of ionic liquids since one ion is fixed as the polymer moiety to form a polymeric chain. PILs have a similar range of applications, comparable with those of ionic liquids but the polymer architecture provides a better chance for controlling the ionic conductivity. They have extended the applications of ionic liquids for designing smart materials or solid electrolytes.

Commercial applications

Many applications have been considered, but few have been commercialized. ILs are used in the production of gasoline by catalyzing alkylation.
An IL based on tetraalkylphosphonium iodide is a solvent for tributyltin iodide, which functions as a catalyst to rearrange the monoepoxide of butadiene. This process was commercialized as a route to 2,5-dihydrofuran, but later discontinued.

Potential applications

Catalysis

ILs improve the catalytic performance of palladium nanoparticles. Furthermore, ionic liquids can be used as pre-catalysts for chemical transformations. In this regard dialkylimidazoliums such as Ac have been used in the combination with a base to generate N-heterocyclic carbenes. These imidazolium based NHCs are known to catalyse a number transformations such as the benzoin condensation and the OTHO reaction.

Pharmaceuticals

Recognizing that approximately 50% of commercial pharmaceuticals are salts, ionic liquid forms of a number of pharmaceuticals have been investigated. Combining a pharmaceutically active cation with a pharmaceutically active anion leads to a Dual Active ionic liquid in which the actions of two drugs are combined.
ILs can extract specific compounds from plants for pharmaceutical, nutritional and cosmetic applications, such as the antimalarial drug artemisinin from the plant Artemisia annua.

Biopolymer processing

The dissolution of cellulose by ILs has attracted interest. A patent application from 1930 showed that 1-alkylpyridinium chlorides dissolve cellulose. Following in the footsteps of the lyocell process, which uses hydrated N-methylmorpholine N-oxide as a solvent for pulp and paper. The "valorization" of cellulose, i.e. its conversion to more valuable chemicals, has been achieved by the use of ionic liquids. Representative products are glucose esters, sorbitol, and alkylgycosides. IL 1-butyl-3-methylimidazolium chloride dissolves freeze-dried banana pulp and with an additional 15% dimethyl sulfoxide, lends itself to carbon-13 NMR analysis. In this way the entire complex of starch, sucrose, glucose, and fructose can be monitored as a function of banana ripening.
Beyond cellulose, ILs have also shown potential in the dissolution, extraction, purification, processing and modification of other biopolymers such as chitin/chitosan, starch, alginate, collagen, gelatin, keratin, and fibroin. For example, ILs allow for the preparation of biopolymer materials in different forms and better biopolymer chemical reactions, leading to biopolymer-based drug/gene-delivery carriers. Moreover, ILs enable the synthesis of chemically modified starches with high efficiency and degrees of substitution and the development of various starch-based materials such as thermoplastic starch, composite films, solid polymer electrolytes, nanoparticles and drug carriers.