Pacific Motorway (Sydney–Newcastle)
M1 Pacific Motorway is a 127-kilometre motorway linking Sydney to Newcastle via the Central Coast and Hunter regions of New South Wales. Formerly known but still commonly referred to by both the public and the government as the F3 Freeway, Sydney–Newcastle Freeway, and Sydney–Newcastle Expressway, it is part of the AusLink road corridor between Sydney and Brisbane.
Route
Pacific Motorway commences at its southern end at an intersection with Pennant Hills Road in Wahroonga partially shared with ramps from Northconnex, then heads in a northerly direction, immediately passing under the interchange with Pacific Highway and then another interchange with NorthConnex in Sydney's north. It continues north, skirting the western edge of Ku-ring-gai Chase National Park, running parallel with the railway line until it descends to the Hawkesbury River, crossing at Kangaroo Point in Brooklyn. Immediately north of the river, the Hawkesbury River interchange provides access to Brooklyn and Mooney Mooney before the road climbs. At Mount White there are major heavy vehicle checking stations on both northbound and southbound carriageways, to assess compliance and roadworthiness of trucks.The motorway passes through the Brisbane Water National Park, and the Calga interchange gives access to Peats Ridge. The motorway then turns east to cross Mooney Mooney Creek by way of the long, high Mooney Mooney Bridge before it reaches the first major interchange on the Central Coast at Kariong. After Kariong, the motorway continues through rural and semi-rural areas of the Central Coast with interchanges at Ourimbah, Tuggerah, Warnervale and Kiar, near Doyalson. From the Doyalson interchange the motorway continues to the west of Lake Macquarie with interchanges near Morisset, Cessnock, Toronto and West Wallsend.
At the West Wallsend interchange, eastbound traffic travels along Newcastle Link Road into Newcastle via Wallsend, and westbound traffic travels along Hunter Expressway towards Kurri Kurri and Singleton, while the motorway continues north to eventually terminate at a signalised intersection with Weakleys Drive and John Renshaw Drive, in Beresfield. From here traffic bound for Highway 1 takes John Renshaw Drive and New England Highway eastwards to meet Pacific Highway at Hexham; and Weakleys Drive connects with New England Highway westwards towards Maitland.
Between Wahroonga and Ourimbah the motorway passes through rugged sandstone country, particularly as it descends to and ascends from the Hawkesbury River. This section of the motorway is characterised by deep cuttings and extensive embankments.
History
Early planning
Planning for a freeway began in 1952, with the aim of providing a high-speed replacement for a section of Pacific Highway that had been built in 1925–30 which was struggling to cope with the increased traffic. It was planned that the freeway would connect to the freeway systems being proposed for both Sydney and Newcastle, providing a city-to-city freeway link.The route between Mount White and Kariong was originally planned to be further south than the route as built, with an easier crossing of Mooney Mooney Creek. By the time that construction on this section was to begin, resistance from the NSW National Parks & Wildlife Service to the proposed route forced the Department of Main Roads to take a route through Calga, using part of the first stage of a proposed freeway route to Singleton which had been built in the 1960s. That scheme has never been further developed.
The route through the northern part of the Central Coast also changed; instead of passing east of Wyong along the western edge of the Tuggerah Lakes, development in that area forced the freeway to be moved to the west of Wyong, with link roads being constructed to meet Pacific Highway near Doyalson and Tuggerah.
In addition, the freeway was revised to go to the west of Lake Macquarie in the Lower Hunter rather than the east, and thereby bypass Newcastle. One of the reasons for this change of location was the issue of connectivity to Pacific Highway north of Newcastle, as the route of the Newcastle Inner City Bypass, which would have provided a northern extension of the freeway, is problematic in terms of its northern terminus point at Sandgate not easily allowing for a northward freeway-standard route to join to Pacific Highway.
The sections of the Newcastle Inner City Bypass from Pacific Highway at to and from Jesmond to have since been constructed, while the original freeway route between Belmont and Bennetts Green and then northward to Pacific Highway at Merewether Heights is still reserved from development, with the possibility that it could be constructed in the future.
Construction
The major stages in the construction of the freeway were:- April 1963 – Construction began on the section from the Hawkesbury River to Mount White. This was opened as a toll road in December 1965.
- October 1966 – Opening of the Mount White-Calga section.
- December 1968 – Opening of Berowra to Hawkesbury River section as a toll road.
- October 1973 – Completion of the Brooklyn Bridge, thereby connecting the Berowra-Hawkesbury River and Hawkesbury River-Calga sections. At this time the separate tolls for the sections north and south of the Hawkesbury were abolished and a single toll of 50 cents was introduced. This was collected at the Berowra toll booths, and the Mooney Mooney toll booths were removed. The toll was removed in 1990 when the Federal Government adopted a policy that a condition of its direct funding of the national highways was that they were to be toll-free.
- December 1983 – Concurrent opening of the Somersby to Ourimbah and Kangy Angy to Wallarah Creek sections, including the single carriageway motorway link from Wallarah Creek to Pacific Highway at Doyalson.
- December 1986 – Opening of the section between Calga and Somersby including the Mooney Mooney Bridge.
- September 1987 – Freeway completed from Wallarah Creek interchange to Mandalong Road interchange.
- March 1988 – Freeway completed from Mandalong Road interchange to Freemans Waterhole interchange.
- March 1989 – Wahroonga to Berowra section opened
- December 1990 – Section from Freemans Waterhole Interchange to Palmer's Road completed.
- December 1993 – Palmer's Road to Minmi section opened.
- December 1997 – "Missing link" between Ourimbah and Kangy Angy opened.
- November 1998 – Final stage of freeway opened between Minmi and John Renshaw Drive, Beresfield.
- December 2004 – Completion of widening to six lanes of the four-lane sections between the Hawkesbury River and Calga. As part of this work, a new south bound truck weighing station was built at Mount White to replace the facility at Berowra. The station was built on the existing two-lane alignment, and a new three-lane south bound alignment was built for car traffic.
- November 2009 – Completion of widening to six lanes of the four-lane sections between Wahroonga and the Hawkesbury River, resulting in a continuous six lane width over the from Wahroonga to Kariong. This work was completed in three stages; stage 1 – Cowan to Berowra, completed September 2008, stage 2 – Berowra to Mount Kuring-Gai, completed September 2009) and stage 3 – Mount Kuring-Gai to Mount Colah, completed November 2009.
- August 2013 – road signs were changed to show the new M1 marker and the new name Pacific Motorway as part of a new statewide alpha numeric route scheme.
- March 2019 – Replacement of the roundabout on Pacific Motorway, John Renshaw and Weakleys Drives, with a signalised intersection.
- May 2020 – Completion of widening Pacific Motorway to three lanes in each direction from Kariong to Somersby.
- June 2020 – Completion of widening Pacific Motorway to three lanes in each direction from Tuggerah to Doyalson.
- October 2021 – Extension of motorway to Raymond Terrace announced
- Peats Ridge Road, used between 1966 and 1986. The road opened to traffic in 1964 and linked the freeway at Calga with Pacific Highway at Ourimbah until it was bypassed by a more direct alignment. The section between Calga and Peats Ridge was an upgrade of an existing road, while the section from Peats Ridge to Ourimbah was a new grade-separated, two-lane road with long sections of third lane. The section from Somersby to Ourimbah was rebuilt to form part of the freeway and opened in 1983.
- The section of Pacific Highway between Ourimbah Creek Road and at Kangy Angy, used between 1955 and 1997. Freeway and Pacific Highway traffic shared this section until it was bypassed in 1997.
- Doyalson Link Road, used between 1983 and 1988. It was the interim northern end of the freeway and still connects directly to Pacific Highway after the freeway was extended.
- The section of Lenaghans Drive north of Stockrington Road, used 1993 and 1998. It was the interim northern end of the freeway and connected directly to the John Renshaw Drive intersection.
Identity
The freeway at one stage carried the Freeway Route 3 designation. This route numbering system, introduced in 1973, was to provide distinctive route numbering and signage for freeways in Sydney and the surrounding areas. However, it was quickly replaced by the National Highway 1 designation in 1974. Despite this, it was still often referred to as the F3 Freeway, with this title being used not only colloquially but on state and federal government documents and also some road signs.
With the conversion to the newer alphanumeric system in 2013, National Highway 1 was replaced with route M1, and Sydney-Newcastle Expressway was officially renamed as M1 Pacific Motorway.
The name is used for the F3 Derby, a rivalry between professional soccer teams from Sydney and Newcastle. The men's derby uses a concrete drilling core from the freeway, while the women's derby uses a piece of guard rail.