Diazonium compound

Diazonium compounds or diazonium salts are a group of organic compounds sharing a common functional group where R can be any organic group, such as an alkyl or an aryl, and X is an inorganic or organic anion, such as a halide. The parent compound, where R is hydrogen, is diazenylium.

Structure and general properties

Arene derivatives

According to X-ray crystallography the linkage is linear in typical diazonium salts. The bond distance in benzenediazonium tetrafluoroborate is 1.083 Å, which is almost identical to that for dinitrogen molecule.
The linear free energy constants σ_m and σ_p indicate that the diazonium group is strongly electron-withdrawing. Thus, the diazonio-substituted phenols and benzoic acids have greatly reduced pK_a values compared to their unsubstituted counterparts. The pK_a of phenolic proton of 4-hydroxybenzenediazonium is 3.4, versus 9.9 for phenol itself. In other words, the diazonium group raises the ionization constant K_a by a million-fold. This also causes arenediazonium salts to have decreased reactivity when electron-donating groups are present on the aromatic ring.
The stability of arenediazonium salts is highly sensitive to the counterion. Phenyldiazonium chloride is dangerously explosive, but benzenediazonium tetrafluoroborate is easily handled on the bench.

Alkane derivatives

Alkanediazonium salts are synthetically unimportant due to their extreme and uncontrolled reactivity toward S_N2/S_N1/E1 substitution. These cations are however of theoretical interest. Furthermore, methyldiazonium carboxylate is believed to be an intermediate in the methylation of carboxylic acids by diazomethane, a common transformation.
Loss of is both enthalpically and entropically favorable:
For secondary and tertiary alkanediazonium species, the enthalpic change is calculated to be close to zero or negative, with minimal activation barrier. Hence, secondary and tertiary alkanediazonium species are either unbound, nonexistent species or, at best, extremely fleeting intermediates.
The aqueous pK_a of methyldiazonium is estimated to be <10.

Preparation

The process of forming diazonium compounds is called "diazotation", "diazoniation", or "diazotization". The reaction was first reported by Peter Griess in 1858, who subsequently discovered several reactions of this new class of compounds. Most commonly, diazonium salts are prepared by treatment of aromatic amines with nitrous acid and additional acid. Usually the nitrous acid is generated in situ from sodium nitrite and the excess mineral acid :
Chloride salts of diazonium cation, traditionally prepared from the aniline, sodium nitrite, and hydrochloric acid, are unstable at room temperature and are classically prepared at 0–5 °C. However, one can isolate diazonium compounds as tetrafluoroborate or tosylate salts, which are stable solids at room temperature. It is often preferred that the diazonium salt remain in solution, but they do tend to supersaturate. Operators have been injured or even killed by an unexpected crystallization of the salt followed by its detonation.
Due to these hazards, diazonium compounds are often not isolated. Instead they are used in situ. This approach is illustrated in the preparation of an arenesulfonyl compound:
Alternatively, an easily prepared diazo cation can transfer the diazotation to another amine through a triazene intermediate.

Reactions

Arenediazonium salts are highly versatile reagents. After electrophilic aromatic substitution, diazonium chemistry is the most frequently applied strategy to prepare aromatic compounds.
In general, two reactions are possible for diazonium salts: reductive additions to arenes and hydrazines, and substitution. The latter case is no simple S_N1 or S_N2 reaction, characterized instead by aryl radicals and cations.

Reductive additions

Diazo coupling

The first and still main use of diazonium salts is azo coupling, which is exploited in the production of azo dyes. In some cases water-fast dyed fabrics are simply immersed in an aqueous solution of the diazonium compound, followed by immersion in a solution of the coupler. In this process, the diazonium compound is attacked by, i.e., coupled to, electron-rich substrates. When the coupling partners are arenes such as anilines and phenols, the process is an example of electrophilic aromatic substitution:
The deep colors of the dyes reflects their extended conjugation. A popular azo dye is aniline yellow, produced from aniline. Naphthalen-2-ol gives an intensely orange-red dye. Methyl orange is an example of an azo dye that is used in the laboratory as a pH indicator..
Another commercially important class of coupling partners are acetoacetic amides, as illustrated by the preparation of Pigment Yellow 12, a diarylide pigment.

To hydrazines

Diazonium salts can be reduced with stannous chloride to the corresponding hydrazine derivatives. This reaction is particularly useful in the Fischer indole synthesis of triptan compounds and indometacin. The use of sodium dithionite is an improvement over stannous chloride since it is a cheaper reducing agent with fewer environmental problems.

Metal complexation

In their reactions with metal complexes, diazonium cations behave similarly to. For example, low-valent metal complexes add with diazonium salts. Illustrative complexes are and the chiral-at-metal complex.

Displacement of the group

Arenediazonium cations undergo several reactions in which the group is replaced by another group or ion.
The process is a formal nucleophilic aromatic substitution reaction, and the basis of the Sandmeyer Reaction, the Gomberg-Bachmann reaction and the Schiemann reaction.
The group is extremely fragile, and displacement can be initiated by:

by organic reduction at an electrode
by mild reducing agents such as ascorbic acid
by gamma radiation from solvated electrons generated in water
photoinduced electron transfer
reduction by metal cations, most commonly a cuprous salt.
anion-induced dediazoniation; a counterion such as iodine gives electron transfer to the diazonium cation forming the aryl radical and an iodine radical
solvent-induced dediazoniation with solvent serving as electron donor.

In many applications, the diazonium salt is produced in situ, to avoid premature reaction. In the so-called Craig method, 2-aminopyridine reacts with sodium nitrite, hydrobromic acid and excess bromine to 2-bromopyridine.
Nevertheless, departure is also somewhat reversible, as indicated by the isotope scrambling of the nitrogen atoms.

By halides

In the, benzenediazonium chloride heated with copper dissolved in HCl or HBr yields chlorobenzene or bromobenzene, respectively:
The copper salt can be formed in situ from copper powder, at the cost of a biaryl byproduct :
Potassium iodide does not require the copper catalyst:
Fluorobenzene is produced by thermal decomposition of benzenediazonium tetrafluoroborate. The conversion is called the.
The traditional Balz–Schiemann reaction has been the subject of many modification, e.g. using hexafluorophosphate and hexafluoroantimonate in place of tetrafluoroborate. The inertness of fluoroanions allows the diazotization to be performed simultaneous with anion introduction, e.g. with nitrosonium hexafluoroantimonate.

By a hydroxyl group

s are produced by heating aqueous solutions of arenediazonium salts:
This reaction goes by the German name Phenolverkochung. The phenol formed may react with the diazonium salt and hence the reaction is carried in the presence of an acid which suppresses this further reaction. A Sandmeyer-type hydroxylation is also possible using and in water.

By inorganic anions

can be obtained by treating benzenediazonium fluoroborate with sodium nitrite in presence of copper. Alternatively, the diazotisation of the aniline can be conducted in presence of cuprous oxide, which generates cuprous nitrite in situ:
Nucleophilic aromatic substitution of haloarenes can rarely introduce cyanide moieties, but such compounds can be easily prepared from diazonium salts. Illustrative is the preparation of benzonitrile using the reagent cuprous cyanide:
Diazonium salts cannot be converted directly to thiols. But in the Leuckart thiophenol reaction, displacement of benzenediazonium chloride with potassium ethylxanthate gives an intermediate xanthate ester that hydrolyzes to thiophenol:

By carbanion equivalents

In the, benzenediazonium chloride reacts with compounds containing activated double bonds to produce phenylated products:
Two research groups reported in 2013. Goossen reported the preparation of a complex from CuSCN,, and. In contrast, Fu reported the trifluoromethylation using Umemoto's reagent and Cu powder. They can be described by the following equation:
The bracket indicates that other ligands on copper are likely present but are omitted.
A formyl group, –CHO, can be introduced by treating the aryl diazonium salt with formaldoxime, followed by hydrolysis of the aryl aldoxime to give the aryl aldehyde. This reaction is known as the.

Biaryl coupling

One aryl group can be coupled to another using arenediazonium salts. For example, treatment of benzenediazonium chloride with benzene in the presence of sodium hydroxide gives diphenyl:
This reaction is known as the Gomberg–Bachmann reaction. A similar conversion is also achieved by treating benzenediazonium chloride with ethanol and copper powder.
Alternatively, a pair of diazonium cations can be coupled to give biaryls. This conversion is illustrated by the coupling of the diazonium salt derived from anthranilic acid to give diphenic acid. In a related reaction, the same diazonium salt undergoes loss of and to give benzyne.